-
Request
a Quote for Thickness Gauge (Dead Weight Type) The thickness of any pressure
sensitive material is measured with the help of a dead weight dial type
micrometer gauge. Thickness is measured between two circular ground faces, one
of which is fixed and the other
capable of moving along an axis perpendicular to the faces. The thickness is
determined under a specified pressures acting on the sample being measured.
-
The PSI Thickness Gauge (Dead Weight type) is a bench-model
instrument. It consists of a rigid cast aluminium base and arm on which a
dial indicator is held firmly. The dial indicator has a flat circular
pressure foot, which exerts a specified pressure on the specimen kept on
an anvil.
-
The anvil is also circular in shape and has an arrangement to make its
upper face parallel to the lower face of the pressure foot. The faces of
the pressure foot and the anvil that are in contact with the test
specimen are ground flat.
-
The specified load is applied on the test specimen with the help of dead
weight (s) placed on top of the gauge stem.
-
The apparatus is finished in grey hammertone stoving painting and bright
chrome plating to give it a corrosion resistant finish.
-
TECHNICAL DATA
-
Range of measurement : 0 - 10 mm (least count 0.01 mm)
Or 0 - 20 mm (least count 0.01 mm)
Or as desired
Diameter of pressure foot : 10 mm (or as desired)
Pressure on pressure foot : 20 KN/m² (or as desired)
Diameter of anvil : 48 mm (or as desired)
