Send Enquiry

Toe Cap Impact Tester / Energy Absorption / Water Absorption & Desorption

Toe Cap Impact Tester, model LT-30

Technical Data

Height of fall 1020 ± 10mm
Mass of falling block 10 ± 0.1kg & 20 ± 0.2kg
Impact Energy 100 ± 2Joules & 200 ± 4Joules
Striker Wedge shaped having an included angle 90º, Length of 60mm edge rounded to 3mm radius, hardness 55HRC.
Clamping Block 150 x 150 x 19mm, hardness at least 60HRC
Base Block 400 x 400 x 40mm approx.
The machine is suitable for operation 220/230 Volts single phase A.C. supply.
Toe Cap Mpact Tester
Back To Main Page Get A Quote

Computerized Energy Absorption of Seat Region Test
Back To Main Page Get A Quote

Computerized Energy Absorption of Seat Region Test Apparatus, as per IS : 15298 (Part-1)

The apparatus consists of a motorized loading unit fitted with compression electronic load cell, cap. 6000N with digital indicator having peak hold facility & over load buzzer. The load application is at the test rate of 10mm ± 3mm/min. The platens are having hardness of 60HRC, complete with dial gauge & clamping device. The machine operates on 220/230Volts, single phase A.C. supply.


Water Absorption & Desorption Test, as per IS : 15298 (Part-2)-2011 & ISO : 20344 - 2004 clause 7.2, model LT-23

Technical Data

Dimensions of test specimen 110 ± 11mm x 40 ± 1mm.
Dimensions of brass roller 120mm ± 1mm diameter x 50mm ± 1mm width
Horizontal movement of roller 50mm ± 2mm
Frequency of movement 20 ± 1cpm
Force applied by roller 80 ± 5Newton approx.
Motor ¼ HP, 220/230VAC
Water Absorption Desorption Tester
Back To Main Page Get A Quote